Hand Made Salmon Hooks|
Ronn Lucas, Sr.
Kelson mixed wing
Posted 21 November 2009 - 11:15 PM
1.JPG 350.23K 2777 downloads
All materials collected and sorted. Materials for the near wing side of fly as it is shown to the right and far wing to the left. Please note I am left-handed, this is why the fly points to the left. Each side divided in short (three strips on top) and long fibred materials (six strips in bottom). For this fly I have taken strips with five strands of each material. Practice will teach you the needed amount.
2.JPG 338.78K 2912 downloads
Start with the short materials from left side. Take one of the strips; here teal, and start build three bundles. As you make three bundles and have five strands, there will only be one strand in the last bundle, but donít worry about this. Note that the points are aligned and laid close together.
3.JPG 360.24K 2514 downloads
Continue with the next material. Start where you ended with the first material (bundle 3).
Still, take care that the points are aligned.
4.JPG 353.23K 2238 downloads
Continue with the last material in the same way. Now you have the three bundles with almost same amount of material in no particular order.
5.JPG 380.19K 2144 downloads
Pick up one of the bundles with a tweezers near the points of the strands as shown. Using a soft pad (like leather) can be helpful here.
6.JPG 178.72K 2109 downloads
Take the strands from the tweezers with you fingers, grab them near the points and stroke them gently together. Order is of no importance and they just have to stick together, not being fully married. When this is done, lay the bundle back on the table. Always keep the strands curving downward.
7.JPG 314.79K 2097 downloads
Repeat with the two other bundles.
8.JPG 178.65K 1980 downloads
Pick up two of the bundles; lay them between you fingers, the upper extending beyond the lower and stroke them gently together.
9.JPG 187.01K 1985 downloads
Repeat with the last bundle.
10.JPG 205.92K 2222 downloads
Following instructions so far, should give you one finished outer wing.
11.JPG 283.06K 2491 downloads
In same way build an inner wing with the long fibred materials for the left wing.
12.JPG 254.63K 2218 downloads
Again, pick up one bundle and stroke the strands together. Repeat with rest of the bundles.
13.JPG 264.66K 2348 downloads
Stroke the three bundles together, one at a time, as for pic.8 and 9. Now you should have an inner and an outer wing for left side of the fly (seen towards the head of the fly).
14.JPG 222.96K 2228 downloads
Repeat all of the above for the other side of the wing.
15.JPG 287.55K 2285 downloads
As everything are tied in together, lay the outer wing on the inner. It is good practice to measure the wing against the fly for positioning the outer wing, to make sure you got as much of the outer wing as possible shown in the final fly.
16.JPG 163.2K 2570 downloads
Pick up both sides of the wing.
17.JPG 131.83K 2473 downloads
Place the whole wing on top of the fly.
18.JPG 198.04K 2362 downloads
Tie the wing on, no glue and no tools, just tie it down. Hint: When I have tied it in an secured the wing with three-four turns of thread, but before I let go on the grip of the wing, I twist the root ends of the wing towards the way I turn to set the wing right.
19.JPG 205.34K 3026 downloads
Wing tied on.
20.JPG 331.26K 2959 downloads
The finished fly with roof of mallard, topping etc.
Classic angling literature and patterns: http://www.classic-salmonfly.dk/
Posted 21 November 2009 - 11:52 PM
Posted 22 November 2009 - 03:27 AM
Thanks for taking the time to do all of this,
Posted 22 November 2009 - 04:10 AM
-built to spill (stab)
Posted 22 November 2009 - 04:17 AM
Posted 22 November 2009 - 08:56 AM
A 'shear' and 'tutorial' DELIGHT !
Love it...love it...love it...(and ofcourse this / YOURS should once more be 'pinned' for this forum)...
For all the ones (as especially me) who aren't realy familiar with the Kelson mix or 'another way' of mixing...Your text and handlings and photo's are 'eyecandy'...ofcourse as You stated at Your start...there is allways the word 'practise makes BETTER ...which in this case I believe it (as allways)..
Anyway a big thanks for 'gifting' us Your KELSON mixed wing tutuorial...by the way YOUR endproduct 'Your' CAPTAIN shows great ...Kelson would had been proud ...
Posted 22 November 2009 - 09:15 AM
The best advice i can give is slow down By Bud Gudry
Posted 22 November 2009 - 09:27 AM
This is the best lesson i've ever had. Thank you very much, Martin
I have never quit understood how a mixed wing could be build and I got the difference between a strip and a strand completely wrong.
Here You'll find some that don't have a name.
Posted 22 November 2009 - 10:09 AM
This is just great.
Its realy facinating to study the different ways to tye a flie. (Also a great challenge as you now)
They couldent whach TV, so they had a lot of time in the past, the result was
realy beautifull flies.
We owe the old inovators, many thanks for their baeutifull flies and techniques.
Posted 22 November 2009 - 07:03 PM
Posted 22 November 2009 - 08:20 PM
Posted 22 November 2009 - 09:28 PM
Thanks for sharing your time and energy to present this.
Posted 22 November 2009 - 10:56 PM
Posted 23 November 2009 - 12:16 AM
Listen to the river sing sweet songs, to rock my soul."
Posted 23 November 2009 - 02:33 AM